Hydroplast PVC Jointing Cements Solvent 237 ml (8oz)

Description

Hydroplast PVC Jointing Cements Solvent 237 ml (8oz). Hydroplast suppliers in Pakistan, Karachi, Islamabad. Contact 0321-2248975

What is Hydroplast PVC Jointing Cements Solvent 237 ml (8oz)?

PVC cleaner adhesive refers to a type of solvent used for preparing and joining PVC (polyvinyl chloride) pipes and fittings. PVC cleaner adhesive typically comes in two separate components:

1. PVC Cleaner:
   We use this adhesive to clean the surfaces of the PVC pipes and fittings before applying the adhesive.
   The cleaner helps to remove dirt, grease, and other contaminants that could interfere with the bonding process.
2. PVC Adhesive (Cement):
   Once we clean surface, PVC adhesive, we also know as PVC cement or PVC glue, will apply to the surfaces of the PVC pipes and fittings.
   This adhesive chemically softens the PVC surfaces, allowing them to fuse together when pressure that we apply. It forms a strong, permanent bond between the pieces.

How to use PVC Solvent?

Preparation: Make sure the surfaces to be joined are clean and free from any dirt, grease, or debris. Use the PVC cleaner solvent and a clean cloth to thoroughly clean the surfaces.

Application of Adhesive: After cleaning, apply a liberal amount of PVC adhesive to both surfaces to be joined. Use a brush or applicator specifically designed for PVC adhesive to ensure even coverage.

Curing Time: Allow sufficient time for the adhesive to cure. The curing time can vary depending on factors such as temperature and humidity, so refer to the manufacturer’s instructions for specific guidance.

Testing: Once the adhesive has fully cured, test the bond to ensure it is strong and secure before putting any pressure or load on the joint.